Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Subfloor and Sheathing installs the structural skin — subfloor, wall sheathing, and roof sheathing — glued and fastened for a stiff, weather-ready building envelope.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Subfloor and Sheathing installs the structural skin — subfloor, wall sheathing, and roof sheathing — glued and fastened for a stiff, weather-ready building envelope. Timberr Framing treats each Markham subfloor and sheathing build as its own structure — layout, spans, and load-bearing details set from the plans first.
In Markham, subfloor and sheathing is typically needed for floors, walls, and roofs on new builds and additions. A stiff, squeak-free, weather-ready envelope ready for trades are the recurring drivers; each Markham build is sized to its own situation, not a one-size approach.
In Markham (York Region), subfloor and sheathing demand is driven mainly by Unionville, Thornhill, Berczy, Cornell, and Markham Village. Markham's Unionville and Thornhill areas drive custom tear-down homes and additions, with new-build framing in Cornell and Berczy. Most of it sits around custom-home builders and infill developers. The building activity around Unionville heritage character, deep tear-down lots, and large custom spans shapes the framing Markham needs: custom homes, additions, and infill, each framed to plan and the Ontario Building Code.
Markham buildings vary widely — Unionville, Thornhill, Berczy, Cornell, and Markham Village — and the right subfloor and sheathing approach changes with each. Timberr Framing reads the property before it scopes the build.
Markham blends heritage Unionville and Thornhill streets with newer Cornell and Berczy subdivisions, so framing ranges from sensitive tear-downs on character lots to high-volume new builds. Each Markham build is scoped around exactly those conditions, so nothing about the building or the neighbourhood is treated as a generic case.
Markham conditions shape the response: custom-home builders and infill developers. Each Markham build has scope of work chosen for that environment, matched to the site instead of a one-size approach.
Expect about on a Markham subfloor and sheathing build: Timberr Framing quotes fast, books the crew, and frames to the plan and the Ontario Building Code.
Timberr Framing keeps Markham framing disciplined — plans confirmed, structure built in order, engineered members set, and the frame left clean for inspection and the next trade.
Timberr Framing keeps Markham framing tied to the permit set: engineered beams and joists set to the plan, headers and load paths built as specified, and any field condition reconciled with the engineer before it's closed in — so the Markham build is framed to code and inspection-ready.
A typical Markham subfloor and sheathing build pairs the work with local conditions: floors, walls, and roofs on new builds and additions around custom-home builders and infill developers. Timberr Framing tailors each build to the situation and documents it for the file. Timberr Framing also serves nearby Unionville, Thornhill, Cornell, so projects spanning the surrounding area stay with one team.
Timberr Framing doesn't leave a Markham frame to settle into trouble. Walls go up plumb and square, joists and rafters are crowned and aligned, connectors and fasteners follow the schedule, and everything is braced and checked before the next stage. The result is a Markham build the drywallers, cabinet installers, and trim carpenters can build on without chasing out-of-square walls.
Timberr Framing frames each Markham build with the correct member in every spot: SPF studs and plates, engineered beams where the spans open up, and I-joists for floors that stay flat and quiet. Matching material to load — rather than forcing one product everywhere — is part of building a Markham frame that lasts and stays true.
Each Markham build is framed to its engineered spec — lumber, connectors, and spans set to the plan and checked — so what's built matches what was approved.
For subfloor and sheathing in Markham, owners and managers pick Timberr Framing for the mix of , licensed, insured, and fully WSIB-covered work, and ground-level knowledge of custom-home builders and infill developers.
Subfloor and Sheathing installs the structural skin — subfloor, wall sheathing, and roof sheathing — glued and fastened for a stiff, weather-ready building envelope. For Markham projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across Markham and the surrounding area. Response time is .
Across Markham — the work concentrates around custom-home builders and infill developers, each job scoped to its own conditions.
Mostly Unionville, Thornhill, Berczy, Cornell, and Markham Village — Timberr Framing frames for builders, general contractors, and homeowners across Markham.
In Markham, the work accounts for custom-home builders and infill developers, so scope of work is matched to the site.
Diaphragm and shear to spec, chosen for the Markham job rather than a default.
Timberr Framing responds to Markham with , covering custom-home builders and infill developers and the surrounding area.
All of Markham — custom-home builders and infill developers and the surrounding neighbourhoods — plus nearby Unionville, Thornhill, Cornell.
Yes — Timberr Framing serves Unionville, Thornhill, Berczy, Cornell, and Markham Village across Markham, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each Markham project and provides a clear, documented quote.
Yes — Timberr Framing assesses Markham subfloor and sheathing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Markham — custom-home builders and infill developers — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Every build is backed: a workmanship warranty. Timberr Framing is licensed, insured, and fully WSIB-covered across Markham.
Tongue-and-groove subfloor, OSB or plywood sheathing, and construction adhesive, glued, fastened, and squeak-free — sized to the spans and loads of each Markham build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Markham build ready for the framing inspection.
Supplied and installed across Markham. See all framing in Markham →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote subfloor and sheathing for Markham — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides subfloor and sheathing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
