Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Multiplex Framing in Toronto — custom-framed and built to plan, framed on site across the GTA.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Multiplex Framing is the structural framing of two-to-four-unit multiplex buildings and conversions — floors, demising walls, and roof — built to the plans, the Ontario Building Code, and fire-separation requirements. For Toronto projects, Timberr Framing frames multiplex framing from the drawings up — floors, walls, and structure built tight, level, and to code.
Toronto multiplex framing work centres on duplex, triplex, and fourplex new builds and conversions, and gentle-density infill. The recurring drivers are fire-rated demising walls, sound separation between units, and stacking loads across storeys — each Toronto build is scoped to its own situation rather than a standard package.
Demand for multiplex framing in Toronto (City of Toronto) comes mostly from Midtown, the Beaches, Leaside, the Annex, High Park, and east-end infill corridors. Toronto's framing demand is dominated by tear-down infill, second-storey additions, and the city's push for laneway and garden suites and multiplex gentle density. Activity clusters in established custom-home builders, infill developers, and design-build renovators. Toronto's construction market — the custom-home builders, general contractors, and developers active around tight infill lots, heritage and committee-of-adjustment constraints, laneway and garden-suite zoning, and shoring near neighbours — drives steady framing demand across very different builds.
Across Toronto, multiplex framing covers a real range of property — Midtown, the Beaches, Leaside, the Annex, High Park, and east-end infill corridors. Each calls for a different response, so Timberr Framing scopes every Toronto build to the building and its use rather than one playbook.
Toronto's building stock runs from century semis and Edwardian homes to post-war bungalows ripe for tear-down, packed onto narrow downtown and midtown lots. Framers here work around shoring next to neighbours, committee-of-adjustment limits, and the city's push for laneway suites, garden suites, and multiplex conversions. Each Toronto build is scoped around exactly those conditions, so nothing about the building or the neighbourhood is treated as a generic case.
What shapes a Toronto build is established custom-home builders, infill developers, and design-build renovators. So Timberr Framing matches scope of work to the site, and a Toronto build rarely needs the same approach as a standard property.
Expect about on a Toronto multiplex framing build: Timberr Framing quotes fast, books the crew, and frames to the plan and the Ontario Building Code.
On Toronto work the sequence is fixed: verify the plans, frame the floor, stand plumb walls, set engineered beams and the roof, then sheath — all to code.
Timberr Framing frames each Toronto multiplex framing build to the engineered and architectural plans: the right members in the right places, spans and headers sized as drawn, and load paths carried to the foundation. The crew works alongside your engineer, architect, and general contractor so the framed Toronto structure reflects exactly what was permitted.
On a typical Toronto build the multiplex framing work covers duplex, triplex, and fourplex new builds and conversions, and gentle-density infill around established custom-home builders, each scoped to its own situation and recorded for the file. Timberr Framing also serves nearby Midtown, The Beaches, Leaside, High Park, so projects spanning the surrounding area stay with one team.
Timberr Framing doesn't leave a Toronto frame to settle into trouble. Walls go up plumb and square, joists and rafters are crowned and aligned, connectors and fasteners follow the schedule, and everything is braced and checked before the next stage. The result is a Toronto build the drywallers, cabinet installers, and trim carpenters can build on without chasing out-of-square walls.
Timberr Framing keeps Toronto framing material honest to the engineering: dimensional SPF where it belongs, engineered wood — LVL, LSL, PSL, and I-joists — where the spans and loads demand it. The result on a Toronto build is a frame that's straight today and stays that way, because each member was chosen and sized for its job.
Each Toronto build is framed to its engineered spec — lumber, connectors, and spans set to the plan and checked — so what's built matches what was approved.
What keeps Timberr Framing busy with Toronto multiplex framing: fast , licensed, insured, and fully WSIB-covered work, full documentation, and a team that knows established custom-home builders, infill developers, and design-build renovators firsthand.
In short: Multiplex Framing is the structural framing of two-to-four-unit multiplex buildings and conversions — floors, demising walls, and roof — built to the plans, the Ontario Building Code, and fire-separation requirements. For Toronto projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across Toronto and the surrounding area. Response time is .
Across Toronto — the work concentrates around established custom-home builders, infill developers, and design-build renovators, each job scoped to its own conditions.
Mostly Midtown, the Beaches, Leaside, the Annex, High Park, and east-end infill corridors — Timberr Framing frames for builders, general contractors, and homeowners across Toronto.
In Toronto, the work accounts for established custom-home builders, infill developers, and design-build renovators, so scope of work is matched to the site.
Engineered to plan loads, OBC Part 9, and fire and sound separation, chosen for the Toronto job rather than a default.
Timberr Framing responds to Toronto with , covering established custom-home builders, infill developers, and design-build renovators and the surrounding area.
All of Toronto — established custom-home builders, infill developers, and design-build renovators and the surrounding neighbourhoods — plus nearby Midtown, The Beaches, Leaside, High Park.
Yes — Timberr Framing serves Midtown, the Beaches, Leaside, the Annex, High Park, and east-end infill corridors across Toronto, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each Toronto project and provides a clear, documented quote.
Yes — Timberr Framing assesses Toronto multiplex framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Toronto — established custom-home builders, infill developers, and design-build renovators — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes. a workmanship warranty, and Timberr Framing is licensed, insured, and fully WSIB-covered on every Toronto job.
SPF lumber, engineered wood (LVL, LSL, PSL, I-joists), and rated wall and floor assemblies, plumb, square, and inspection-ready — sized to the spans and loads of each Toronto build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Toronto build ready for the framing inspection.
Supplied and installed across Toronto. See all framing in Toronto →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote multiplex framing for Toronto — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides multiplex framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
