Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Multiplex Framing in Richmond Hill — custom-framed and built to plan, framed on site across the GTA.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Multiplex Framing is the structural framing of two-to-four-unit multiplex buildings and conversions — floors, demising walls, and roof — built to the plans, the Ontario Building Code, and fire-separation requirements. Every Richmond Hill multiplex framing job Timberr Framing takes is framed to the plan and the OBC — measured on site, built square, and ready for inspection.
Richmond Hill multiplex framing work centres on duplex, triplex, and fourplex new builds and conversions, and gentle-density infill. Fire-rated demising walls, sound separation between units, and stacking loads across storeys are the recurring drivers; each Richmond Hill build is sized to its own situation, not a one-size approach.
In Richmond Hill (York Region), multiplex framing demand is driven mainly by Oak Ridges, Mill Pond, Bayview Hill, and Jefferson. Richmond Hill's Mill Pond and Bayview Hill neighbourhoods anchor an estate and custom-home framing market on large, often sloped, lots. The work concentrates around estate and custom-home builders. The building activity around Oak Ridges Moraine grade and lot constraints, large estate spans, and mature-tree lots shapes the framing Richmond Hill needs: custom homes, additions, and infill, each framed to plan and the Ontario Building Code.
From Oak Ridges, Mill Pond, Bayview Hill, and Jefferson, no two Richmond Hill multiplex framing jobs are quite alike. Timberr Framing matches scope, equipment, and crew to the specific property each time.
Richmond Hill builds often sit on the rolling, sloped lots of the Oak Ridges Moraine, where grade, walkouts, and large estate massing drive the framing around Mill Pond and Bayview Hill. Each Richmond Hill build is scoped around exactly those conditions, so nothing about the building or the neighbourhood is treated as a generic case.
In Richmond Hill, the work has to account for estate and custom-home builders. So Timberr Framing matches scope of work to the site, and a Richmond Hill build rarely needs the same approach as a standard property.
Timberr Framing keeps Richmond Hill framing on schedule — roughly from quote to crew on site, built to plan and left inspection-ready.
For Richmond Hill: lay out to the drawings, frame the structure in sequence, set the engineered members, and leave it plumb, square, and ready for the framing inspection.
Timberr Framing frames Richmond Hill multiplex framing straight from your architectural and engineered drawings — reading the spans, headers, beam sizes, and load paths off the permit set and building to them exactly. The crew coordinates with your engineer, architect, and general contractor so every LVL, beam pocket, and bearing point matches the stamped plans, and the Richmond Hill build is left ready for the framing inspection with nothing left to guesswork.
On a typical Richmond Hill build the multiplex framing work covers duplex, triplex, and fourplex new builds and conversions, and gentle-density infill around estate and custom-home builders, each scoped to its own situation and recorded for the file. Timberr Framing also serves nearby Oak Ridges, Mill Pond, Bayview Hill, so projects spanning the surrounding area stay with one team.
A frame is only as good as how true it's built. Timberr Framing frames every Richmond Hill build plumb, level, and square, with the right nails and engineered connectors at every joint, crowns sighted, and walls braced so nothing moves before sheathing. A straight, well-built frame means drywall, cabinets, tile, and trim go in clean — so the quality of the Richmond Hill framing shows long after the structure is closed in.
Spans drive the materials on a Richmond Hill build. Timberr Framing reaches for LVL, LSL, and PSL when headers, beams, and posts carry real load, frames walls in straight kiln-dried SPF, and runs engineered I-joists for long floor spans — all sized to the structural plan so the Richmond Hill build carries its loads without sag or bounce.
Timberr Framing frames each Richmond Hill build to plan: the right lumber, engineered beams sized to the spans, and a structure built plumb and square, ready for inspection.
Across Richmond Hill, owners call Timberr Framing for multiplex framing for a simple reason: licensed, insured, and fully WSIB-covered work, , and a crew that actually knows estate and custom-home builders and how local buildings fail.
The short version: Multiplex Framing is the structural framing of two-to-four-unit multiplex buildings and conversions — floors, demising walls, and roof — built to the plans, the Ontario Building Code, and fire-separation requirements. For Richmond Hill projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across Richmond Hill and the surrounding area. Response time is .
Across Richmond Hill — the work concentrates around estate and custom-home builders, each job scoped to its own conditions.
Mostly Oak Ridges, Mill Pond, Bayview Hill, and Jefferson — Timberr Framing frames for builders, general contractors, and homeowners across Richmond Hill.
In Richmond Hill, the work accounts for estate and custom-home builders, so scope of work is matched to the site.
Engineered to plan loads, OBC Part 9, and fire and sound separation, chosen for the Richmond Hill job rather than a default.
Timberr Framing responds to Richmond Hill with , covering estate and custom-home builders and the surrounding area.
All of Richmond Hill — estate and custom-home builders and the surrounding neighbourhoods — plus nearby Oak Ridges, Mill Pond, Bayview Hill.
Yes — Timberr Framing serves Oak Ridges, Mill Pond, Bayview Hill, and Jefferson across Richmond Hill, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each Richmond Hill project and provides a clear, documented quote.
Yes — Timberr Framing assesses Richmond Hill multiplex framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Richmond Hill — estate and custom-home builders — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes — a workmanship warranty. Timberr Framing is licensed, insured, and fully WSIB-covered, and every Richmond Hill build is documented the same way.
SPF lumber, engineered wood (LVL, LSL, PSL, I-joists), and rated wall and floor assemblies, plumb, square, and inspection-ready — sized to the spans and loads of each Richmond Hill build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Richmond Hill build ready for the framing inspection.
Supplied and installed across Richmond Hill. See all framing in Richmond Hill →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote multiplex framing for Richmond Hill — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides multiplex framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
