Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Multiplex Framing in North York — custom-framed and built to plan, framed on site across the GTA.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Multiplex Framing is the structural framing of two-to-four-unit multiplex buildings and conversions — floors, demising walls, and roof — built to the plans, the Ontario Building Code, and fire-separation requirements. In North York, Timberr Framing handles multiplex framing on site: plates snapped, walls framed plumb and square, and the structure built to the engineered plan.
North York multiplex framing work centres on duplex, triplex, and fourplex new builds and conversions, and gentle-density infill. Across North York, it solves fire-rated demising walls, sound separation between units, and stacking loads across storeys, and because no two sites are identical the scope is set per site, not a default.
North York's need for multiplex framing (City of Toronto) is driven largely by Willowdale, Bayview Village, Lansing, York Mills, and Don Mills. North York's Willowdale and York Mills areas drive a steady stream of large custom tear-down homes and estate-scale additions. Activity clusters in custom-home builders and estate-home contractors. The building activity around deep tear-down lots, large estate spans, mature-tree and grade constraints, and second-unit conversions shapes the framing North York needs: custom homes, additions, and infill, each framed to plan and the Ontario Building Code.
North York property spans the full range — Willowdale, Bayview Village, Lansing, York Mills, and Don Mills — and multiplex framing looks different on each. Timberr Framing sets the approach to the building type on every North York build.
North York is dominated by deep, wide post-war lots in Willowdale and York Mills that increasingly carry large custom tear-down homes. The framing challenge is long spans, three-storey massing, and mature-tree and grading rules on established streets. Timberr Framing factors that into every North York build — the assessment, the equipment, and the restoration plan all start from how North York buildings actually fail.
The North York variables that matter are custom-home builders and estate-home contractors. Timberr Framing sets scope of work for those exact conditions on every North York build, working to site rather than a regional default.
Timberr Framing keeps North York framing on schedule — roughly from quote to crew on site, built to plan and left inspection-ready.
Timberr Framing keeps North York framing disciplined — plans confirmed, structure built in order, engineered members set, and the frame left clean for inspection and the next trade.
Timberr Framing frames North York multiplex framing straight from your architectural and engineered drawings — reading the spans, headers, beam sizes, and load paths off the permit set and building to them exactly. The crew coordinates with your engineer, architect, and general contractor so every LVL, beam pocket, and bearing point matches the stamped plans, and the North York build is left ready for the framing inspection with nothing left to guesswork.
On a typical North York build the multiplex framing work covers duplex, triplex, and fourplex new builds and conversions, and gentle-density infill around custom-home builders and estate-home contractors, each scoped to its own situation and recorded for the file. Timberr Framing also serves nearby Willowdale, Bayview Village, York Mills, so projects spanning the surrounding area stay with one team.
Timberr Framing frames each North York build like the finishes depend on it — because they do. Square corners, plumb walls, aligned joists, correct hangers and fasteners, and solid blocking mean the North York build closes in clean and stays tight, with no movement working its way into the drywall and trim later.
A good frame is a kit of the right parts. For North York multiplex framing, Timberr Framing frames in kiln-dried SPF, sets engineered LVL and PSL beams over wide openings, and lays I-joists for stable floors — every member sized to the plan so the North York structure is strong, quiet, and built to the code.
Every North York multiplex framing build is framed to the engineered drawings and the Ontario Building Code — spans, headers, and load paths built as specified, not approximated, so it passes the framing inspection.
For multiplex framing in North York, owners and managers pick Timberr Framing for the mix of , licensed, insured, and fully WSIB-covered work, and ground-level knowledge of custom-home builders and estate-home contractors.
In short: Multiplex Framing is the structural framing of two-to-four-unit multiplex buildings and conversions — floors, demising walls, and roof — built to the plans, the Ontario Building Code, and fire-separation requirements. For North York projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across North York and the surrounding area. Response time is .
Across North York — the work concentrates around custom-home builders and estate-home contractors, each job scoped to its own conditions.
Mostly Willowdale, Bayview Village, Lansing, York Mills, and Don Mills — Timberr Framing frames for builders, general contractors, and homeowners across North York.
In North York, the work accounts for custom-home builders and estate-home contractors, so scope of work is matched to the site.
Engineered to plan loads, OBC Part 9, and fire and sound separation, chosen for the North York job rather than a default.
Timberr Framing responds to North York with , covering custom-home builders and estate-home contractors and the surrounding area.
All of North York — custom-home builders and estate-home contractors and the surrounding neighbourhoods — plus nearby Willowdale, Bayview Village, York Mills.
Yes — Timberr Framing serves Willowdale, Bayview Village, Lansing, York Mills, and Don Mills across North York, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each North York project and provides a clear, documented quote.
Yes — Timberr Framing assesses North York multiplex framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of North York — custom-home builders and estate-home contractors — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes — a workmanship warranty. Timberr Framing is licensed, insured, and fully WSIB-covered, and every North York build is documented the same way.
SPF lumber, engineered wood (LVL, LSL, PSL, I-joists), and rated wall and floor assemblies, plumb, square, and inspection-ready — sized to the spans and loads of each North York build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each North York build ready for the framing inspection.
Supplied and installed across North York. See all framing in North York →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote multiplex framing for North York — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides multiplex framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
