Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Post and Beam Framing builds with heavy timber posts and beams for exposed structural character — vaulted great rooms, timber porches, and feature framing on premium homes.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Post and Beam Framing builds with heavy timber posts and beams for exposed structural character — vaulted great rooms, timber porches, and feature framing on premium homes. In Richmond Hill, Timberr Framing handles post and beam framing on site: plates snapped, walls framed plumb and square, and the structure built to the engineered plan.
In Richmond Hill, post and beam framing is typically needed for great rooms, covered porches, pavilions, and timber accents. The recurring drivers are exposed heavy-timber structure that is both beautiful and engineered — each Richmond Hill build is scoped to its own situation rather than a standard package.
Richmond Hill's need for post and beam framing (York Region) is driven largely by Oak Ridges, Mill Pond, Bayview Hill, and Jefferson. Richmond Hill's Mill Pond and Bayview Hill neighbourhoods anchor an estate and custom-home framing market on large, often sloped, lots. The work concentrates around estate and custom-home builders. Much of the demand tracks Richmond Hill's residential and commercial construction near Oak Ridges Moraine grade and lot constraints, large estate spans, and mature-tree lots — varied builds, every one framed to its own structure.
The mix in Richmond Hill — Oak Ridges, Mill Pond, Bayview Hill, and Jefferson — means each post and beam framing build starts from the specific structure, not a template, when Timberr Framing scopes it.
Richmond Hill builds often sit on the rolling, sloped lots of the Oak Ridges Moraine, where grade, walkouts, and large estate massing drive the framing around Mill Pond and Bayview Hill. Timberr Framing factors that into every Richmond Hill build — the assessment, the equipment, and the restoration plan all start from how Richmond Hill buildings actually fail.
In Richmond Hill, the work has to account for estate and custom-home builders. Timberr Framing sets scope of work for those exact conditions on every Richmond Hill build, working to site rather than a regional default.
Timberr Framing keeps Richmond Hill framing on schedule — roughly from quote to crew on site, built to plan and left inspection-ready.
Each Richmond Hill post and beam framing build is laid out, framed to the engineered plan, and checked for plumb and square — so it passes inspection and the trades that follow get a true structure.
For Richmond Hill work, Timberr Framing reads the structural drawings closely — beam and header schedules, joist layouts, and shear-wall details — and frames to them precisely, coordinating with your engineer and GC so the build matches the permit, carries the loads as designed, and is ready for the framing inspection.
A typical Richmond Hill post and beam framing build pairs the work with local conditions: great rooms, covered porches, pavilions, and timber accents around estate and custom-home builders. Timberr Framing tailors each build to the situation and documents it for the file. Timberr Framing also serves nearby Oak Ridges, Mill Pond, Bayview Hill, so projects spanning the surrounding area stay with one team.
Timberr Framing doesn't leave a Richmond Hill frame to settle into trouble. Walls go up plumb and square, joists and rafters are crowned and aligned, connectors and fasteners follow the schedule, and everything is braced and checked before the next stage. The result is a Richmond Hill build the drywallers, cabinet installers, and trim carpenters can build on without chasing out-of-square walls.
The material list matters as much as the layout. On Richmond Hill jobs, Timberr Framing uses kiln-dried SPF for framing, LVL and LSL for headers and beams, PSL for heavily loaded posts and girders, and I-joists for long, flat floors — each sized to the engineered drawings so the Richmond Hill build performs the way it was designed to.
Each Richmond Hill build is framed to its engineered spec — lumber, connectors, and spans set to the plan and checked — so what's built matches what was approved.
For post and beam framing in Richmond Hill, owners and managers pick Timberr Framing for the mix of , licensed, insured, and fully WSIB-covered work, and ground-level knowledge of estate and custom-home builders.
In short: Post and Beam Framing builds with heavy timber posts and beams for exposed structural character — vaulted great rooms, timber porches, and feature framing on premium homes. For Richmond Hill projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across Richmond Hill and the surrounding area. Response time is .
Across Richmond Hill — the work concentrates around estate and custom-home builders, each job scoped to its own conditions.
Mostly Oak Ridges, Mill Pond, Bayview Hill, and Jefferson — Timberr Framing frames for builders, general contractors, and homeowners across Richmond Hill.
In Richmond Hill, the work accounts for estate and custom-home builders, so scope of work is matched to the site.
Engineered for span and point loads — and in Richmond Hill, spec'd to the load and environment on site.
Timberr Framing responds to Richmond Hill with , covering estate and custom-home builders and the surrounding area.
All of Richmond Hill — estate and custom-home builders and the surrounding neighbourhoods — plus nearby Oak Ridges, Mill Pond, Bayview Hill.
Yes — Timberr Framing serves Oak Ridges, Mill Pond, Bayview Hill, and Jefferson across Richmond Hill, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each Richmond Hill project and provides a clear, documented quote.
Yes — Timberr Framing assesses Richmond Hill post and beam framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Richmond Hill — estate and custom-home builders — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes. a workmanship warranty, and Timberr Framing is licensed, insured, and fully WSIB-covered on every Richmond Hill job.
Heavy timber (Douglas fir, glulam), steel connectors, and timber joinery, exposed, finished-grade, and inspection-ready — sized to the spans and loads of each Richmond Hill build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Richmond Hill build ready for the framing inspection.
Supplied and installed across Richmond Hill. See all framing in Richmond Hill →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote post and beam framing for Richmond Hill — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides post and beam framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
