Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Rough Framing is the structural carpentry that forms the skeleton of a build — sill plates, studs, joists, and rafters — from the foundation up.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Rough Framing is the structural carpentry that forms the skeleton of a build — sill plates, studs, joists, and rafters — from the foundation up. Every Richmond Hill rough framing job Timberr Framing takes is framed to the plan and the OBC — measured on site, built square, and ready for inspection.
Richmond Hill rough framing work centres on new builds, additions, and structural shells. Getting a clean, square, on-schedule structural shell ready for trades are the recurring drivers; each Richmond Hill build is sized to its own situation, not a one-size approach.
In Richmond Hill (York Region), rough framing demand is driven mainly by Oak Ridges, Mill Pond, Bayview Hill, and Jefferson. Richmond Hill's Mill Pond and Bayview Hill neighbourhoods anchor an estate and custom-home framing market on large, often sloped, lots. The work concentrates around estate and custom-home builders. Much of the demand tracks Richmond Hill's residential and commercial construction near Oak Ridges Moraine grade and lot constraints, large estate spans, and mature-tree lots — varied builds, every one framed to its own structure.
The mix in Richmond Hill — Oak Ridges, Mill Pond, Bayview Hill, and Jefferson — means each rough framing build starts from the specific structure, not a template, when Timberr Framing scopes it.
Richmond Hill builds often sit on the rolling, sloped lots of the Oak Ridges Moraine, where grade, walkouts, and large estate massing drive the framing around Mill Pond and Bayview Hill. Timberr Framing factors that into every Richmond Hill build — the assessment, the equipment, and the restoration plan all start from how Richmond Hill buildings actually fail.
What shapes a Richmond Hill build is estate and custom-home builders. So Timberr Framing matches scope of work to the site, and a Richmond Hill build rarely needs the same approach as a standard property.
Timberr Framing keeps Richmond Hill framing on schedule — roughly from quote to crew on site, built to plan and left inspection-ready.
Timberr Framing keeps Richmond Hill framing disciplined — plans confirmed, structure built in order, engineered members set, and the frame left clean for inspection and the next trade.
Timberr Framing keeps Richmond Hill framing tied to the permit set: engineered beams and joists set to the plan, headers and load paths built as specified, and any field condition reconciled with the engineer before it's closed in — so the Richmond Hill build is framed to code and inspection-ready.
A typical Richmond Hill rough framing build pairs the work with local conditions: new builds, additions, and structural shells around estate and custom-home builders. Timberr Framing tailors each build to the situation and documents it for the file. Timberr Framing also serves nearby Oak Ridges, Mill Pond, Bayview Hill, so projects spanning the surrounding area stay with one team.
Timberr Framing builds Richmond Hill framing to last: engineered lumber where the spans call for it, proper hangers and connectors at every bearing, fasteners to spec, and a structure squared and braced before close-in. A frame built right in Richmond Hill doesn't squeak, sag, or telegraph problems through the finishes years down the road.
The material list matters as much as the layout. On Richmond Hill jobs, Timberr Framing uses kiln-dried SPF for framing, LVL and LSL for headers and beams, PSL for heavily loaded posts and girders, and I-joists for long, flat floors — each sized to the engineered drawings so the Richmond Hill build performs the way it was designed to.
Every Richmond Hill rough framing build is framed to the engineered drawings and the Ontario Building Code — spans, headers, and load paths built as specified, not approximated, so it passes the framing inspection.
Timberr Framing earns Richmond Hill rough framing work the hard way — , licensed, insured, and fully WSIB-covered crews, and real familiarity with estate and custom-home builders rather than a one-size regional script.
Put simply, Rough Framing is the structural carpentry that forms the skeleton of a build — sill plates, studs, joists, and rafters — from the foundation up. For Richmond Hill projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across Richmond Hill and the surrounding area. Response time is .
Across Richmond Hill — the work concentrates around estate and custom-home builders, each job scoped to its own conditions.
Mostly Oak Ridges, Mill Pond, Bayview Hill, and Jefferson — Timberr Framing frames for builders, general contractors, and homeowners across Richmond Hill.
In Richmond Hill, the work accounts for estate and custom-home builders, so scope of work is matched to the site.
Engineered to plan and OBC — matched to the Richmond Hill site, not a one-size approach.
Timberr Framing responds to Richmond Hill with , covering estate and custom-home builders and the surrounding area.
All of Richmond Hill — estate and custom-home builders and the surrounding neighbourhoods — plus nearby Oak Ridges, Mill Pond, Bayview Hill.
Yes — Timberr Framing serves Oak Ridges, Mill Pond, Bayview Hill, and Jefferson across Richmond Hill, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each Richmond Hill project and provides a clear, documented quote.
Yes — Timberr Framing assesses Richmond Hill rough framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Richmond Hill — estate and custom-home builders — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes — a workmanship warranty. Timberr Framing is licensed, insured, and fully WSIB-covered, and every Richmond Hill build is documented the same way.
SPF dimensional lumber and engineered wood, plumb, square, and inspection-ready — sized to the spans and loads of each Richmond Hill build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Richmond Hill build ready for the framing inspection.
Supplied and installed across Richmond Hill. See all framing in Richmond Hill →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote rough framing for Richmond Hill — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides rough framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
