Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Rough Framing is the structural carpentry that forms the skeleton of a build — sill plates, studs, joists, and rafters — from the foundation up.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Rough Framing is the structural carpentry that forms the skeleton of a build — sill plates, studs, joists, and rafters — from the foundation up. In North York, Timberr Framing handles rough framing on site: plates snapped, walls framed plumb and square, and the structure built to the engineered plan.
Most North York rough framing jobs involve new builds, additions, and structural shells. Getting a clean, square, on-schedule structural shell ready for trades are the recurring drivers; each North York build is sized to its own situation, not a one-size approach.
North York's need for rough framing (City of Toronto) is driven largely by Willowdale, Bayview Village, Lansing, York Mills, and Don Mills. North York's Willowdale and York Mills areas drive a steady stream of large custom tear-down homes and estate-scale additions. Most of it sits around custom-home builders and estate-home contractors. North York's construction market — the custom-home builders, general contractors, and developers active around deep tear-down lots, large estate spans, mature-tree and grade constraints, and second-unit conversions — drives steady framing demand across very different builds.
From Willowdale, Bayview Village, Lansing, York Mills, and Don Mills, no two North York rough framing jobs are quite alike. Timberr Framing matches scope, equipment, and crew to the specific property each time.
North York is dominated by deep, wide post-war lots in Willowdale and York Mills that increasingly carry large custom tear-down homes. The framing challenge is long spans, three-storey massing, and mature-tree and grading rules on established streets. Timberr Framing factors that into every North York build — the assessment, the equipment, and the restoration plan all start from how North York buildings actually fail.
North York conditions shape the response: custom-home builders and estate-home contractors. Timberr Framing sets scope of work for those exact conditions on every North York build, working to site rather than a regional default.
Expect about on a North York rough framing build: Timberr Framing quotes fast, books the crew, and frames to the plan and the Ontario Building Code.
Timberr Framing frames each North York job by the book — lay out from the plans, build the floor system, frame and stand the walls, set the roof, and sheath, with the structure checked square at each stage.
Timberr Framing frames each North York rough framing build to the engineered and architectural plans: the right members in the right places, spans and headers sized as drawn, and load paths carried to the foundation. The crew works alongside your engineer, architect, and general contractor so the framed North York structure reflects exactly what was permitted.
Representative North York work: rough framing for new builds, additions, and structural shells, often near custom-home builders and estate-home contractors — handled end to end and fully documented. Timberr Framing also serves nearby Willowdale, Bayview Village, York Mills, so projects spanning the surrounding area stay with one team.
A frame is only as good as how true it's built. Timberr Framing frames every North York build plumb, level, and square, with the right nails and engineered connectors at every joint, crowns sighted, and walls braced so nothing moves before sheathing. A straight, well-built frame means drywall, cabinets, tile, and trim go in clean — so the quality of the North York framing shows long after the structure is closed in.
Spans drive the materials on a North York build. Timberr Framing reaches for LVL, LSL, and PSL when headers, beams, and posts carry real load, frames walls in straight kiln-dried SPF, and runs engineered I-joists for long floor spans — all sized to the structural plan so the North York build carries its loads without sag or bounce.
Every North York rough framing build is framed to the engineered drawings and the Ontario Building Code — spans, headers, and load paths built as specified, not approximated, so it passes the framing inspection.
Timberr Framing earns North York rough framing work the hard way — , licensed, insured, and fully WSIB-covered crews, and real familiarity with custom-home builders and estate-home contractors rather than a one-size regional script.
Put simply, Rough Framing is the structural carpentry that forms the skeleton of a build — sill plates, studs, joists, and rafters — from the foundation up. For North York projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across North York and the surrounding area. Response time is .
Across North York — the work concentrates around custom-home builders and estate-home contractors, each job scoped to its own conditions.
Mostly Willowdale, Bayview Village, Lansing, York Mills, and Don Mills — Timberr Framing frames for builders, general contractors, and homeowners across North York.
In North York, the work accounts for custom-home builders and estate-home contractors, so scope of work is matched to the site.
Engineered to plan and OBC — matched to the North York site, not a one-size approach.
Timberr Framing responds to North York with , covering custom-home builders and estate-home contractors and the surrounding area.
All of North York — custom-home builders and estate-home contractors and the surrounding neighbourhoods — plus nearby Willowdale, Bayview Village, York Mills.
Yes — Timberr Framing serves Willowdale, Bayview Village, Lansing, York Mills, and Don Mills across North York, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each North York project and provides a clear, documented quote.
Yes — Timberr Framing assesses North York rough framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of North York — custom-home builders and estate-home contractors — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes — Timberr Framing is licensed, insured, and fully WSIB-covered and stands behind North York work with a workmanship warranty.
SPF dimensional lumber and engineered wood, plumb, square, and inspection-ready — sized to the spans and loads of each North York build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each North York build ready for the framing inspection.
Supplied and installed across North York. See all framing in North York →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote rough framing for North York — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides rough framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
