Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. Timberr Framing builds roof and truss framing for Caledon around the real plans, spans, and loads of each project — framed to spec, not by rule of thumb.
Most Caledon roof and truss framing jobs involve gable, hip, cathedral, and complex custom rooflines. Complex rooflines, vaulted ceilings, and load paths on custom homes are the recurring drivers; each Caledon build is sized to its own situation, not a one-size approach.
In Caledon (Peel Region), roof and truss framing demand is driven mainly by Caledon East, Bolton, Inglewood, and the Caledon estates. Caledon framing serves acreage estate homes and additions across Caledon East, Bolton, and the escarpment, often on large rural lots. The work concentrates around estate and custom-home builders. Caledon's construction market — the custom-home builders, general contractors, and developers active around Niagara Escarpment and Greenbelt constraints, acreage lots, and rural servicing — drives steady framing demand across very different builds.
Caledon property spans the full range — Caledon East, Bolton, Inglewood, and the Caledon estates — and roof and truss framing looks different on each. Timberr Framing sets the approach to the building type on every Caledon build.
What that means on the ground: Caledon's framing works acreage and escarpment lots under Greenbelt and Niagara Escarpment constraints, where rural servicing, grade, and large estate massing define the builds. That local picture shapes how Timberr Framing assesses, equips, and prices each Caledon build.
The Caledon variables that matter are estate and custom-home builders. So Timberr Framing matches scope of work to the site, and a Caledon build rarely needs the same approach as a standard property.
Turnaround on roof and truss framing in Caledon runs about . Timberr Framing quotes from the plans, schedules the crew, and frames to the build schedule — keeping each Caledon build moving without cutting the spec.
Timberr Framing builds each Caledon build from the plans up — plates, studs, headers, joists, trusses, and sheathing — squared and fastened to the OBC.
Timberr Framing keeps Caledon framing tied to the permit set: engineered beams and joists set to the plan, headers and load paths built as specified, and any field condition reconciled with the engineer before it's closed in — so the Caledon build is framed to code and inspection-ready.
Representative Caledon work: roof and truss framing for gable, hip, cathedral, and complex custom rooflines, often near estate and custom-home builders — handled end to end and fully documented. Timberr Framing also serves nearby Bolton, Caledon East, Inglewood, so projects spanning the surrounding area stay with one team.
A frame is only as good as how true it's built. Timberr Framing frames every Caledon build plumb, level, and square, with the right nails and engineered connectors at every joint, crowns sighted, and walls braced so nothing moves before sheathing. A straight, well-built frame means drywall, cabinets, tile, and trim go in clean — so the quality of the Caledon framing shows long after the structure is closed in.
A good frame is a kit of the right parts. For Caledon roof and truss framing, Timberr Framing frames in kiln-dried SPF, sets engineered LVL and PSL beams over wide openings, and lays I-joists for stable floors — every member sized to the plan so the Caledon structure is strong, quiet, and built to the code.
Every Caledon roof and truss framing build is framed to the engineered drawings and the Ontario Building Code — spans, headers, and load paths built as specified, not approximated, so it passes the framing inspection.
Timberr Framing earns Caledon roof and truss framing work the hard way — , licensed, insured, and fully WSIB-covered crews, and real familiarity with estate and custom-home builders rather than a one-size regional script.
Put simply, Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. For Caledon projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across Caledon and the surrounding area. Response time is .
Across Caledon — the work concentrates around estate and custom-home builders, each job scoped to its own conditions.
Mostly Caledon East, Bolton, Inglewood, and the Caledon estates — Timberr Framing frames for builders, general contractors, and homeowners across Caledon.
In Caledon, the work accounts for estate and custom-home builders, so scope of work is matched to the site.
Designed for snow, wind, and OBC, chosen for the Caledon job rather than a default.
Timberr Framing responds to Caledon with , covering estate and custom-home builders and the surrounding area.
All of Caledon — estate and custom-home builders and the surrounding neighbourhoods — plus nearby Bolton, Caledon East, Inglewood.
Yes — Timberr Framing serves Caledon East, Bolton, Inglewood, and the Caledon estates across Caledon, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each Caledon project and provides a clear, documented quote.
Yes — Timberr Framing assesses Caledon roof and truss framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Caledon — estate and custom-home builders — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes. a workmanship warranty, and Timberr Framing is licensed, insured, and fully WSIB-covered on every Caledon job.
SPF lumber, engineered trusses, and LVL ridge beams, braced, sheathed, and inspection-ready — sized to the spans and loads of each Caledon build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Caledon build ready for the framing inspection.
Supplied and installed across Caledon. See all framing in Caledon →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote roof and truss framing for Caledon — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides roof and truss framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
