Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. In King City, Timberr Framing handles roof and truss framing on site: plates snapped, walls framed plumb and square, and the structure built to the engineered plan.
King City roof and truss framing work centres on gable, hip, cathedral, and complex custom rooflines. Complex rooflines, vaulted ceilings, and load paths on custom homes are the recurring drivers; each King City build is sized to its own situation, not a one-size approach.
King City's need for roof and truss framing (York Region) is driven largely by King City, Nobleton, Schomberg, and the King estates. King City is one of the GTA's top luxury acreage-estate framing markets, with very large custom homes on rural lots. The work concentrates around estate and luxury custom-home builders. King City's construction market — the custom-home builders, general contractors, and developers active around very large estate and acreage lots, well and septic sites, and long architectural spans — drives steady framing demand across very different builds.
King City buildings vary widely — King City, Nobleton, Schomberg, and the King estates — and the right roof and truss framing approach changes with each. Timberr Framing reads the property before it scopes the build.
King City, Nobleton, and Schomberg sit on rural acreage lots with wells and septic, carrying some of the region's largest luxury estate homes with long architectural spans and outbuildings. Timberr Framing factors that into every King City build — the assessment, the equipment, and the restoration plan all start from how King City buildings actually fail.
In King City, the work has to account for estate and luxury custom-home builders. Timberr Framing sets scope of work for those exact conditions on every King City build, working to site rather than a regional default.
Expect about on a King City roof and truss framing build: Timberr Framing quotes fast, books the crew, and frames to the plan and the Ontario Building Code.
Every King City roof and truss framing build follows a clear sequence: confirm the plans and field dimensions, snap the plates, frame walls plumb and square, set the floor and roof structure, and sheath — built to the Ontario Building Code and left inspection-ready.
Timberr Framing frames King City roof and truss framing straight from your architectural and engineered drawings — reading the spans, headers, beam sizes, and load paths off the permit set and building to them exactly. The crew coordinates with your engineer, architect, and general contractor so every LVL, beam pocket, and bearing point matches the stamped plans, and the King City build is left ready for the framing inspection with nothing left to guesswork.
Representative King City work: roof and truss framing for gable, hip, cathedral, and complex custom rooflines, often near estate and luxury custom-home builders — handled end to end and fully documented. Timberr Framing also serves nearby Nobleton, Schomberg, King, so projects spanning the surrounding area stay with one team.
Timberr Framing frames each King City build like the finishes depend on it — because they do. Square corners, plumb walls, aligned joists, correct hangers and fasteners, and solid blocking mean the King City build closes in clean and stays tight, with no movement working its way into the drywall and trim later.
Not every part of a King City frame wants the same material. Timberr Framing frames walls and standard spans in kiln-dried SPF, switches to LVL, LSL, and PSL for headers, beams, and long clear spans, and uses engineered I-joists for flat, quiet, long-running floors. Choosing the right member for each location — and sizing it to the engineered plan — is what keeps a King City build strong, straight, and free of the bounce and shrinkage that cheaper shortcuts invite.
Timberr Framing builds King City framing to code and to drawing: load paths correct, engineered members set right, and the frame left inspection-ready for the GC and the trades.
Property owners and managers across King City choose Timberr Framing for roof and truss framing because the work is licensed, insured, and fully WSIB-covered, backed by . Knowing King City — estate and luxury custom-home builders — means each build is handled by a team that reads the local conditions, not a distant call centre.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. For King City projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across King City and the surrounding area. Response time is .
Across King City — the work concentrates around estate and luxury custom-home builders, each job scoped to its own conditions.
Mostly King City, Nobleton, Schomberg, and the King estates — Timberr Framing frames for builders, general contractors, and homeowners across King City.
In King City, the work accounts for estate and luxury custom-home builders, so scope of work is matched to the site.
Designed for snow, wind, and OBC — matched to the King City site, not a one-size approach.
Timberr Framing responds to King City with , covering estate and luxury custom-home builders and the surrounding area.
All of King City — estate and luxury custom-home builders and the surrounding neighbourhoods — plus nearby Nobleton, Schomberg, King.
Yes — Timberr Framing serves King City, Nobleton, Schomberg, and the King estates across King City, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each King City project and provides a clear, documented quote.
Yes — Timberr Framing assesses King City roof and truss framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of King City — estate and luxury custom-home builders — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes — a workmanship warranty. Timberr Framing is licensed, insured, and fully WSIB-covered, and every King City build is documented the same way.
SPF lumber, engineered trusses, and LVL ridge beams, braced, sheathed, and inspection-ready — sized to the spans and loads of each King City build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each King City build ready for the framing inspection.
Supplied and installed across King City. See all framing in King City →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote roof and truss framing for King City — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides roof and truss framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
