Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. Timberr Framing frames roof and truss framing in Etobicoke to the architectural plans and the Ontario Building Code — laid out, built plumb, and left inspection-ready.
In Etobicoke, roof and truss framing is typically needed for gable, hip, cathedral, and complex custom rooflines. Complex rooflines, vaulted ceilings, and load paths on custom homes are the recurring drivers; each Etobicoke build is sized to its own situation, not a one-size approach.
Demand for roof and truss framing in Etobicoke (City of Toronto) comes mostly from the Kingsway, Mimico, Long Branch, Markland Wood, and Princess-Rosethorn. Etobicoke's Kingsway and lakeshore neighbourhoods anchor a strong custom and estate-home framing market alongside Mimico and Long Branch infill. Activity clusters in custom-home builders and luxury renovators. Much of the demand tracks Etobicoke's residential and commercial construction near Kingsway heritage character, lakeshore lots, and large custom tear-down spans — varied builds, every one framed to its own structure.
The mix in Etobicoke — the Kingsway, Mimico, Long Branch, Markland Wood, and Princess-Rosethorn — means each roof and truss framing build starts from the specific structure, not a template, when Timberr Framing scopes it.
Etobicoke pairs the heritage character of the Kingsway with lakeshore lots in Mimico and Long Branch, so framers move between sensitive renovations, large custom tear-downs, and infill on tight frontages. Each Etobicoke build is scoped around exactly those conditions, so nothing about the building or the neighbourhood is treated as a generic case.
The Etobicoke variables that matter are custom-home builders and luxury renovators. So Timberr Framing matches scope of work to the site, and an Etobicoke build rarely needs the same approach as a standard property.
Expect about on an Etobicoke roof and truss framing build: Timberr Framing quotes fast, books the crew, and frames to the plan and the Ontario Building Code.
Each Etobicoke roof and truss framing build is laid out, framed to the engineered plan, and checked for plumb and square — so it passes inspection and the trades that follow get a true structure.
For Etobicoke work, Timberr Framing reads the structural drawings closely — beam and header schedules, joist layouts, and shear-wall details — and frames to them precisely, coordinating with your engineer and GC so the build matches the permit, carries the loads as designed, and is ready for the framing inspection.
Representative Etobicoke work: roof and truss framing for gable, hip, cathedral, and complex custom rooflines, often near custom-home builders and luxury renovators — handled end to end and fully documented. Timberr Framing also serves nearby The Kingsway, Mimico, Markland Wood, so projects spanning the surrounding area stay with one team.
The difference between a fast frame and a good one is in the details. Timberr Framing sights every crown, holds plumb and level across the Etobicoke build, sets connectors and fasteners to the schedule, and braces walls properly — so the Etobicoke structure is true and the trades that follow aren't fighting it.
Timberr Framing frames each Etobicoke build with the correct member in every spot: SPF studs and plates, engineered beams where the spans open up, and I-joists for floors that stay flat and quiet. Matching material to load — rather than forcing one product everywhere — is part of building a Etobicoke frame that lasts and stays true.
For Etobicoke work, nothing is guessed — Timberr Framing confirms the spans, the loads, and the layout against the plans before framing, and builds to the OBC.
Property owners and managers across Etobicoke choose Timberr Framing for roof and truss framing because the work is licensed, insured, and fully WSIB-covered, backed by . Knowing Etobicoke — custom-home builders and luxury renovators — means each build is handled by a team that reads the local conditions, not a distant call centre.
The short version: Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. For Etobicoke projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across Etobicoke and the surrounding area. Response time is .
Across Etobicoke — the work concentrates around custom-home builders and luxury renovators, each job scoped to its own conditions.
Mostly the Kingsway, Mimico, Long Branch, Markland Wood, and Princess-Rosethorn — Timberr Framing frames for builders, general contractors, and homeowners across Etobicoke.
In Etobicoke, the work accounts for custom-home builders and luxury renovators, so scope of work is matched to the site.
Designed for snow, wind, and OBC — matched to the Etobicoke site, not a one-size approach.
Timberr Framing responds to Etobicoke with , covering custom-home builders and luxury renovators and the surrounding area.
All of Etobicoke — custom-home builders and luxury renovators and the surrounding neighbourhoods — plus nearby The Kingsway, Mimico, Markland Wood.
Yes — Timberr Framing serves the Kingsway, Mimico, Long Branch, Markland Wood, and Princess-Rosethorn across Etobicoke, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each Etobicoke project and provides a clear, documented quote.
Yes — Timberr Framing assesses Etobicoke roof and truss framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Etobicoke — custom-home builders and luxury renovators — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes. a workmanship warranty, and Timberr Framing is licensed, insured, and fully WSIB-covered on every Etobicoke job.
SPF lumber, engineered trusses, and LVL ridge beams, braced, sheathed, and inspection-ready — sized to the spans and loads of each Etobicoke build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Etobicoke build ready for the framing inspection.
Supplied and installed across Etobicoke. See all framing in Etobicoke →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote roof and truss framing for Etobicoke — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides roof and truss framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
