Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. For Newmarket projects, Timberr Framing frames roof and truss framing from the drawings up — floors, walls, and structure built tight, level, and to code.
In Newmarket, roof and truss framing is typically needed for gable, hip, cathedral, and complex custom rooflines. Complex rooflines, vaulted ceilings, and load paths on custom homes are the recurring drivers; each Newmarket build is sized to its own situation, not a one-size approach.
Newmarket's need for roof and truss framing (York Region) is driven largely by Old Newmarket, Stonehaven, Glenway, and Summerhill. Newmarket framing centres on additions and infill around heritage Old Newmarket plus custom builds in Stonehaven and Glenway. Activity clusters in custom-home builders and renovators. Newmarket's construction market — the custom-home builders, general contractors, and developers active around heritage Main Street character, mature lots, and addition-heavy older stock — drives steady framing demand across very different builds.
From Old Newmarket, Stonehaven, Glenway, and Summerhill, no two Newmarket roof and truss framing jobs are quite alike. Timberr Framing matches scope, equipment, and crew to the specific property each time.
Newmarket's heritage core off Main Street sees addition-heavy work on older, smaller-lot homes, while Stonehaven and Glenway carry larger custom builds on mature streets. Timberr Framing factors that into every Newmarket build — the assessment, the equipment, and the restoration plan all start from how Newmarket buildings actually fail.
In Newmarket, the work has to account for custom-home builders and renovators. Timberr Framing sets scope of work for those exact conditions on every Newmarket build, working to site rather than a regional default.
Expect about on a Newmarket roof and truss framing build: Timberr Framing quotes fast, books the crew, and frames to the plan and the Ontario Building Code.
On Newmarket work the sequence is fixed: verify the plans, frame the floor, stand plumb walls, set engineered beams and the roof, then sheath — all to code.
Timberr Framing keeps Newmarket framing tied to the permit set: engineered beams and joists set to the plan, headers and load paths built as specified, and any field condition reconciled with the engineer before it's closed in — so the Newmarket build is framed to code and inspection-ready.
Representative Newmarket work: roof and truss framing for gable, hip, cathedral, and complex custom rooflines, often near custom-home builders and renovators — handled end to end and fully documented. Timberr Framing also serves nearby Old Newmarket, Stonehaven, Glenway, so projects spanning the surrounding area stay with one team.
Timberr Framing doesn't leave a Newmarket frame to settle into trouble. Walls go up plumb and square, joists and rafters are crowned and aligned, connectors and fasteners follow the schedule, and everything is braced and checked before the next stage. The result is a Newmarket build the drywallers, cabinet installers, and trim carpenters can build on without chasing out-of-square walls.
Spans drive the materials on a Newmarket build. Timberr Framing reaches for LVL, LSL, and PSL when headers, beams, and posts carry real load, frames walls in straight kiln-dried SPF, and runs engineered I-joists for long floor spans — all sized to the structural plan so the Newmarket build carries its loads without sag or bounce.
For Newmarket work, nothing is guessed — Timberr Framing confirms the spans, the loads, and the layout against the plans before framing, and builds to the OBC.
What keeps Timberr Framing busy with Newmarket roof and truss framing: fast , licensed, insured, and fully WSIB-covered work, full documentation, and a team that knows custom-home builders and renovators firsthand.
Put simply, Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. For Newmarket projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across Newmarket and the surrounding area. Response time is .
Across Newmarket — the work concentrates around custom-home builders and renovators, each job scoped to its own conditions.
Mostly Old Newmarket, Stonehaven, Glenway, and Summerhill — Timberr Framing frames for builders, general contractors, and homeowners across Newmarket.
In Newmarket, the work accounts for custom-home builders and renovators, so scope of work is matched to the site.
Designed for snow, wind, and OBC — and in Newmarket, spec'd to the load and environment on site.
Timberr Framing responds to Newmarket with , covering custom-home builders and renovators and the surrounding area.
All of Newmarket — custom-home builders and renovators and the surrounding neighbourhoods — plus nearby Old Newmarket, Stonehaven, Glenway.
Yes — Timberr Framing serves Old Newmarket, Stonehaven, Glenway, and Summerhill across Newmarket, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each Newmarket project and provides a clear, documented quote.
Yes — Timberr Framing assesses Newmarket roof and truss framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Newmarket — custom-home builders and renovators — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Every build is backed: a workmanship warranty. Timberr Framing is licensed, insured, and fully WSIB-covered across Newmarket.
SPF lumber, engineered trusses, and LVL ridge beams, braced, sheathed, and inspection-ready — sized to the spans and loads of each Newmarket build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Newmarket build ready for the framing inspection.
Supplied and installed across Newmarket. See all framing in Newmarket →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote roof and truss framing for Newmarket — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides roof and truss framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
