Built to plan
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads.
Send your specs, drawings, or photos and we’ll get you a quote.
Send your specs, drawings, or photos and we'll get you a quote.
Framed from your architectural and engineered drawings — to the plan and the Ontario Building Code, not by rule of thumb.
Engineered lumber, LVL/PSL beams, and connectors chosen for the spans and loads on the plans.
Send specs, drawings, or photos and get a clear, buildable quote with no guesswork.
Installation and site work completed in accordance with Ontario requirements.
Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. Every Aurora roof and truss framing job Timberr Framing takes is framed to the plan and the OBC — measured on site, built square, and ready for inspection.
In Aurora, roof and truss framing is typically needed for gable, hip, cathedral, and complex custom rooflines. The recurring drivers are complex rooflines, vaulted ceilings, and load paths on custom homes — each Aurora build is scoped to its own situation rather than a standard package.
Aurora's need for roof and truss framing (York Region) is driven largely by Aurora Estates, Hills of St Andrew, Bayview Wellington, and the historic core. Aurora framing is anchored by estate custom homes in Aurora Estates and the Hills of St Andrew, with additions in the historic core. Activity clusters in estate and custom-home builders. Aurora's construction market — the custom-home builders, general contractors, and developers active around large estate lots, heritage core character, and ravine-grade builds — drives steady framing demand across very different builds.
Aurora property spans the full range — Aurora Estates, Hills of St Andrew, Bayview Wellington, and the historic core — and roof and truss framing looks different on each. Timberr Framing sets the approach to the building type on every Aurora build.
What that means on the ground: Aurora framing is anchored by the large estate lots of Aurora Estates and the Hills of St Andrew, where acreage massing and ravine grade shape long-span custom homes. That local picture shapes how Timberr Framing assesses, equips, and prices each Aurora build.
Aurora conditions shape the response: estate and custom-home builders. Each Aurora build has scope of work chosen for that environment, matched to the site instead of a one-size approach.
Expect about on an Aurora roof and truss framing build: Timberr Framing quotes fast, books the crew, and frames to the plan and the Ontario Building Code.
On Aurora work the sequence is fixed: verify the plans, frame the floor, stand plumb walls, set engineered beams and the roof, then sheath — all to code.
Timberr Framing treats the engineered plan as the spec for every Aurora build. The crew sets engineered beams, I-joists, and LVL headers to the drawing, holds the bearing points and load paths the engineer called for, and keeps the Aurora structure aligned with the stamped permit set from layout through to the inspection.
A typical Aurora roof and truss framing build pairs the work with local conditions: gable, hip, cathedral, and complex custom rooflines around estate and custom-home builders. Timberr Framing tailors each build to the situation and documents it for the file. Timberr Framing also serves nearby Aurora Estates, Bayview Wellington, so projects spanning the surrounding area stay with one team.
Timberr Framing builds Aurora framing to last: engineered lumber where the spans call for it, proper hangers and connectors at every bearing, fasteners to spec, and a structure squared and braced before close-in. A frame built right in Aurora doesn't squeak, sag, or telegraph problems through the finishes years down the road.
On Aurora builds, Timberr Framing uses engineered wood where it earns its place — LVL and LSL headers, PSL posts and girders, and I-joist floors — alongside straight SPF framing for walls. Each is sized to the engineered drawings, so the Aurora build carries its loads cleanly and holds its shape for the life of the building.
Each Aurora build is framed to its engineered spec — lumber, connectors, and spans set to the plan and checked — so what's built matches what was approved.
Timberr Framing earns Aurora roof and truss framing work the hard way — , licensed, insured, and fully WSIB-covered crews, and real familiarity with estate and custom-home builders rather than a one-size regional script.
In short: Roof and Truss Framing builds the roof structure — stick-framed rafters or engineered trusses — to the design and snow/wind loads. For Aurora projects, it's framed to the plans and the Ontario Building Code, not a rule of thumb.
Yes — we respond across Aurora and the surrounding area. Response time is .
Across Aurora — the work concentrates around estate and custom-home builders, each job scoped to its own conditions.
Mostly Aurora Estates, Hills of St Andrew, Bayview Wellington, and the historic core — Timberr Framing frames for builders, general contractors, and homeowners across Aurora.
In Aurora, the work accounts for estate and custom-home builders, so scope of work is matched to the site.
Designed for snow, wind, and OBC — matched to the Aurora site, not a one-size approach.
Timberr Framing responds to Aurora with , covering estate and custom-home builders and the surrounding area.
All of Aurora — estate and custom-home builders and the surrounding neighbourhoods — plus nearby Aurora Estates, Bayview Wellington.
Yes — Timberr Framing serves Aurora Estates, Hills of St Andrew, Bayview Wellington, and the historic core across Aurora, each scoped to its own building and use.
Cost depends on the size and complexity of the build, the materials, and the scope — Timberr Framing reviews the plans for each Aurora project and provides a clear, documented quote.
Yes — Timberr Framing assesses Aurora roof and truss framing on site and provides a documented scope before any work begins.
A 5-star Google rating, real knowledge of Aurora — estate and custom-home builders — , work that is licensed, insured, and fully WSIB-covered, and full documentation on every build.
Yes — a workmanship warranty. Timberr Framing is licensed, insured, and fully WSIB-covered, and every Aurora build is documented the same way.
SPF lumber, engineered trusses, and LVL ridge beams, braced, sheathed, and inspection-ready — sized to the spans and loads of each Aurora build and set to the engineered plan.
Yes — Timberr Framing frames to your architectural and engineered drawings, builds to the Ontario Building Code, and leaves each Aurora build ready for the framing inspection.
Supplied and installed across Aurora. See all framing in Aurora →
Custom homes, additions, renovations, and multiplexes — framed and installed for contractors, property managers, and industrial sites.
Send your plans, drawings, or a description. Timberr Framing can quote roof and truss framing for Aurora — framed to plan, licensed, insured, and WSIB-covered.
Backed by our workmanship warranty — we stand behind every job · Licensed, Insured & WSIB-Registered
We’ll review your details and follow up.
Timberr Framing provides roof and truss framing — built to plan with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
Timberr Framing has framed homes, additions, renovations, and multiplexes for recognized brands, institutions, and property groups across Ontario.
